Reading the Diagrams

If you can't draw it, you don't know it. That rule runs my meeting rooms, and it runs this book. Every front, coverage, pressure, and run fit in these forty chapters is drawn, and you will be asked to draw hundreds of them yourself. This chapter teaches you the notation. Give it twenty minutes now and you will read every diagram in the book at a glance.

The diagrams are plain text in a fixed-width font, so they work on a phone, in a printed binder, or copied onto a whiteboard. They are not pretty. They are the way coaches have always drawn football: fast, consistent, and readable by anyone who knows the code.


The one orientation rule

The defense is at the top. The offense is at the bottom. You are looking down at the offense.

That is how a defensive coordinator draws a play on the whiteboard: standing behind his own defense, looking across the line of scrimmage at what's coming. Every diagram in this book keeps that orientation. "Left" and "right" in a description always mean left and right as you look at the page.

The ball sits in the middle of the offensive line, at the center. Everything is drawn no wider than 72 characters so it renders on a phone without wrapping.


Offensive symbols

Symbol Player
O Offensive lineman. The line is written O O O O O; the middle one is the center
Q Quarterback
R Running back
B Fullback or second back
Y Tight end
U Second tight end
X Split end — a wide receiver on the line of scrimmage
Z Flanker — a wide receiver off the line of scrimmage
H Slot receiver

Offensive personnel is written as two digits: the number of running backs, then the number of tight ends. 11 personnel is one back and one tight end, which leaves three wide receivers. 12 personnel is one back and two tight ends. 21 is two backs and one tight end. Chapter 3 covers all of them and why the defense substitutes to match.

OFFENSE ONLY: 11 PERSONNEL, 2x2 (1 back, 1 tight end, 3 receivers)

 X                    O  O  O  O  O  Y
          H                                      Z
                            Q
                            R

📊 Diagram (described): An offense in 11 personnel. Five offensive linemen stand in a row, the center in the middle, with a tight end attached on the right. A split end stands on the line far to the left. A slot receiver is off the line between the split end and the left tackle, and a flanker is off the line far to the right. The quarterback is behind the center and the running back behind him. Two receivers are on each side, which is why it is called "2x2."

Seven players are on the line of scrimmage — the minimum the rules require — and four are off it.


Defensive symbols

Symbol Player
E Defensive end or edge rusher
T Defensive tackle
N Nose tackle
S Sam linebacker (usually aligned to the tight end or strength side)
M Mike linebacker (the middle linebacker)
W Will linebacker (usually aligned to the weak side)
* Nickel defender, also called the "Star" — the fifth defensive back, usually over the slot
D Dime back — the sixth defensive back
C Cornerback
F Free safety
$ Strong safety

The $ and * surprise people. They were chosen because they can never be mistaken for an offensive letter.

NICKEL 4-2-5 vs. 11 PERSONNEL 2x2 (pre-snap)

            F                             $

 C        *             W      M                 C
                   E       N    T      E
 X                    O  O  O  O  O  Y
          H                                      Z
                            Q
                            R

📊 Diagram (described): The Sentinels' base nickel defense against the same 2x2 formation. Two safeties stand deep, the free safety on the left and the strong safety on the right, toward the tight end. A cornerback is across from each outside receiver, the nickel is over the slot on the left, and two linebackers stand inside, the Will on the left and the Mike on the right. On the line are an end outside the left tackle, a nose tackle shaded just left of the center, a tackle on the outside shoulder of the right guard, and an end outside the tight end: four linemen, two linebackers, five defensive backs — a 4-2-5.


Technique numbers

A technique is a number that says exactly where a defensive lineman or linebacker lines up relative to an offensive lineman. It is the defensive line's address system, and the whole league uses some version of it.

Technique Alignment
0 Head-up on the center
1 Shaded to one side of the center
2i Inside shade of the guard
2 Head-up on the guard
3 Outside shade of the guard
4i Inside shade of the tackle
4 Head-up on the tackle
5 Outside shade of the tackle
7 Inside shade of the tight end
6 Head-up on the tight end
9 Outside shade of the tight end

The numbers mirror on both sides of the center, so a "3-technique" can be on either guard. When a coach says "our 3-technique," he means the defensive tackle on the outside shoulder of a guard.

One warning: some systems swap 6 and 7. In those programs, 6 is the inside shade of the tight end and 7 is head-up. This book uses 7 for the inside shade and 6 for head-up, and every chapter that uses the numbers says so. When you go to a clinic or join a new staff, ask which way they count.

TECHNIQUES AND GAPS (center to tight end; the left side mirrors)

          A           B           C           D
    0  1    2i  2  3    4i  4  5     7  6  9
    O           O           O           Y
  center      guard      tackle     tight end

📊 Diagram (described): Half of an offensive line drawn from the center outward to the right: center, guard, tackle, and tight end. Above each lineman are the technique numbers for his inside shade, head-up, and outside shade. Over the center is 0, and just outside the center is 1. Over the guard are 2i, 2, and 3, from inside to outside. Over the tackle are 4i, 4, and 5. Over the tight end are 7, 6, and 9. Above the spaces between linemen are the gap letters: the A gap between center and guard, the B gap between guard and tackle, the C gap between tackle and tight end, and the D gap outside the tight end.


Gaps, and the honest gap count

A gap is the space between two offensive blockers (or outside the last one). Run defense is the job of having a defender responsible for every gap. The letters work outward from the center on each side:

  • A gap: between the center and a guard
  • B gap: between a guard and a tackle
  • C gap: between a tackle and a tight end — or simply outside the tackle when there is no tight end
  • D gap: outside the tight end

You will hear people say "the offense has eight gaps." Sometimes it does. Here is the honest count, and the book holds itself to it:

GAP COUNT: FIVE LINEMEN + ONE TIGHT END = SEVEN GAPS

     C     B     A     A     B     C     D
        O     O     O     O     O     Y
                    Q
                    R

  Five linemen alone ............................ 6 gaps
  Add one attached tight end (D gap) ............ 7 gaps
  Add a second tight end on the other side ...... 8 gaps
  Or one tight end + a running quarterback ...... 8 gaps

📊 Diagram (described): Five offensive linemen and a tight end attached on the right. Gap letters sit in the spaces: from left to right, C outside the left tackle, B, A, A on either side of the center, B, C between the right tackle and the tight end, and D outside the tight end. That is seven gaps. A list below the drawing counts them: five linemen alone create six gaps, an attached tight end adds a seventh, and either a second tight end or a quarterback who is a real threat to run brings the total to eight.

A fullback or offset back can also change where the gaps are by becoming a lead blocker at the point of attack. And a running quarterback effectively adds one more gap: if he can keep the ball, someone has to account for him — the "plus-one" at the heart of every option play. Chapter 5's title says "eight gaps"; that is the two-tight-end case, or one tight end with a quarterback who runs.


Receiver numbering

Coverage rules don't care about receivers' names or positions. They care about where receivers are lined up. So receivers are numbered from the outside in, on each side of the ball: the widest receiver on a side is #1, the next one in is #2, the next is #3.

RECEIVER NUMBERING: 3x1 TRIPS RIGHT (count outside-in on each side)

 X                    O  O  O  O  O  Y
                                           H           Z
                            Q
                            R

  LEFT SIDE:   X = #1
  RIGHT SIDE:  Z = #1 (widest)   H = #2   Y = #3 (innermost)

📊 Diagram (described): A trips formation with three receivers to the right. On the left, only the split end is outside the line, so he is number one on that side. On the right, the flanker is widest and is number one, the slot receiver inside him is number two, and the attached tight end, closest to the ball, is number three. The numbering starts over on each side of the center.

The numbers follow alignment, not personnel. A tight end split wide might be #1. A running back who motions out becomes a numbered receiver on the side he goes to. That is one reason motion troubles a defense (Chapter 14): every motion can renumber the formation, and every rule that says "the safety reads #2" has to know, instantly, who #2 now is.

A formation is described by how many receivers are on each side: 2x2 is two and two, 3x1 is three to one side and one to the other ("trips"), and empty means no back in the backfield — usually 3x2.


Movement: motion, routes, drops, and rush paths

Symbol Meaning
~~> Pre-snap motion — a player moving before the snap
\| / \ - with ^ v < > A route or a drop; the arrowhead shows the direction
==> or vv A pass-rush or blitz path
[ ] A labeled zone, such as [DEEP 1/3] or [HOOK]
MOVEMENT EXAMPLE: jet motion, a nickel blitz, a safety rotating down

                    F
                    |
                    v
 C      *
        vv
          vv
            ==>
 X                    O  O  O  O  O  Y
     H ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~>
                            Q
                            R

📊 Diagram (described): Three kinds of movement. The free safety, deep in the middle, has a line and a downward arrowhead below him: he is rotating down toward the line of scrimmage. The nickel on the left has a blitz path of downward marks angling toward the center and ending in a double-line arrow aimed at the quarterback. The slot receiver on the left has a long wavy line running across the whole formation to the right: jet motion before the snap.

Routes use the same strokes as drops: a vertical is a | topped with ^, a post bends inward with / or \, an out breaks to the sideline with -> or <-. When a play needs both routes and coverage, they usually get separate diagrams, because packing both into 72 characters makes neither readable.


Zone labels

Zones are labeled in square brackets, placed where the zone is on the field:

Label Zone
[DEEP 1/3] A deep third — Cover 3's outside deep zones
[DEEP MIDDLE 1/3] The deep middle third, usually the free safety's in Cover 3
[DEEP 1/2] A deep half — Cover 2's safety zones
[DEEP 1/4] A deep quarter — Cover 4
[HOOK] or [HOOK/CURL] The underneath zone inside, between the hashes
[CURL/FLAT] The underneath zone from the curl area out to the flat
[FLAT] The short zone near the sideline
[MIDDLE] or [RAT] The short or intermediate middle, often a "rat" or "robber" defender

Pre-snap and post-snap: every call is drawn twice

This is the most important convention in the book. Every coverage, front, and pressure gets two diagrams: a PRE-SNAP picture and a POST-SNAP picture, each labeled.

The reason is the book's thesis: one of the three ways a defense closes the information gap is disguise. The pre-snap picture is what the quarterback sees. The post-snap picture is what he gets. Draw only the second and you will never understand why a coverage fooled anybody.

Here is the pair you will see more than any other: a two-high shell that turns into single-high Cover 3.

PRE-SNAP (two-high look)

            F                             $

 C        *             W      M                 C
                   E       N    T      E
 X                    O  O  O  O  O  Y
          H                                      Z
                            Q
                            R

📊 Diagram (described): The same nickel defense against the same 2x2 formation shown earlier. Both safeties are deep and wide, at the same depth, one on each side of the field. To the quarterback this is a two-high shell, which could be Cover 2, Cover 4, or Cover 6.

POST-SNAP (Cover 3 Sky: $ rotates down, F spins to the middle)

   [DEEP 1/3]         [DEEP MIDDLE 1/3]          [DEEP 1/3]
       C                      F                       C
       ^                      ^                       ^
 [CURL/FLAT]      [HOOK]            [HOOK]      [CURL/FLAT]
      *             W                 M         ->  $

📊 Diagram (described): After the snap, the same defense plays Cover 3. The two cornerbacks bail backward into the deep outside thirds, and the free safety moves to the deep middle third. Underneath, the nickel takes the curl-to-flat zone on the left, the Will and the Mike take the two hook zones inside, and the strong safety, who started deep on the right, drops down and out into the curl-to-flat zone on the right. The four linemen rush. That is three deep defenders, four underneath, and four rushers.

Look at what changed. Before the snap, the quarterback saw two deep safeties and might reasonably expect the deep middle of the field to be open between them — the classic weakness of Cover 2. After the snap, the free safety is sitting in exactly that spot. Chapter 6 tells the story of a playoff snap that turned on this one picture.


Field width and hash marks

The width of the field is the same at every level: 53⅓ yards, or 160 feet. The hash marks are not, and the difference matters more than most readers expect.

Level Hash marks from each sideline Distance between hashes
NFL 70 ft 9 in 18 ft 6 in
College (NCAA) 60 ft 40 ft
High school (NFHS) 53 ft 4 in 53 ft 4 in (the hashes divide the field into thirds)
HASH MARKS BY LEVEL (approximate scale: one character = 2.5 feet)

      |<-------------------------- 160 ft --------------------------->|
NFL   |                           |       |                           |
COLL  |                       |               |                       |
HS    |                    |                     |                    |

📊 Diagram (described): Three horizontal strips, each 160 feet wide from sideline to sideline, drawn to approximate scale. On the NFL strip, the two hash marks are close together near the middle of the field. On the college strip, the hashes are farther apart. On the high school strip, the hashes are farther apart still, dividing the field into three roughly equal parts.

When the ball is spotted on a hash mark, the side of the field nearer the sideline is the boundary (the short side) and the other side is the field (the wide side). In the NFL, a ball on the hash leaves roughly 71 feet to the boundary and 89 feet to the field — a modest difference. In college it is 60 feet against 100. In high school it is about 53 feet against 107 — the field side is twice as wide as the boundary. That is why field-and-boundary calls, split-field coverages (Chapter 12), and boundary blitzes matter so much more below the NFL. Most diagrams put the ball in the middle for clarity; when the hash matters, the diagram says so.


"Diagram (described)": the accessibility convention

Every diagram in this book is followed immediately by a box that begins with 📊 Diagram (described):. It describes the picture in plain sentences — who is where, who moves where, and what the result looks like.

It exists so that a reader using a screen reader — to whom a plain-text diagram is a jumble of letters and dashes — or a reader who doesn't think in pictures yet loses nothing. It is also one of the best study tools in the book:

  1. Cover the description and read the diagram. Say out loud what you think it shows.
  2. Read the description and check yourself.
  3. Later, reverse it: read only the description and draw the diagram from it on a blank sheet.

The third step is the skill a coordinator uses when a player asks "what do I do against this?" and there is no whiteboard. If you can turn words into a drawing and a drawing into words, you know the call.

When you meet a new diagram, read it in the order a coordinator reads film — the order Chapter 40 drills on every snap: offense and formation, receiver numbers, the box count, the safeties (the shell), the corners, and only then the post-snap picture of who rushed and where each dropper went.

The full terminology list is in Appendix A — Terminology and Notation, and every coverage in the book is drawn again in Appendix B — Coverage Encyclopedia.